Honda CB 1000 FP/FR/FS/FT 93-96 Goldfren Competition Front Brake Pads

MATERIAL GP5

Characteristics

FEATURES:

• Very high static friction coefficient
• Low abrasive interaction with the brake rotor material
• Specially modification braking surface
• Application of heat isolation from back side
• Minimal difference between wet and dry braking performance
• Good abrasive resistance
• High braking power to 550Ã�°C(max.800°C)
• The sintered friction material is soldered to the copper coated backing plate, so separation (which can happen with organics material) is virtually eliminated as a failure risk.
• Continuous braking effect

Material operting parametres:

Specific pressure:5,0 Mpa
Sliding speed:30 m/s
Constant maximum temp.:550°C
Short time maximum temp.:800°C

NOTES:

• replacement of brake pads shoul be done in dry clean conditions. If the friction material comes into contact with oil or brake fluid and the liquit soaks into the pores of the friction material, a catastrophic fall in friction coefficient (braking performance) could occur
• Braking performance is significantly influenced by the quantity of the braking surface of the Disc rotor, by the age and quantity of th brake fluid, and by the correct choice of Complementary friction pad material.
• To achieve perfect brake effects we are recommending to use also brake wheels and hoses of the same brand as that of brake lining, i.e. GOLDfren®, because of excellent common friction properties

BRAKE WITH THE GOLD FREN PRODUCTS!