The picture below shows a Chain DID Standard Grade. Thousands of other top quality Spares listed on our website at refreshingly low prices. >>
Although DID S Standard chain represents DID's simplest grade of chain, it still features the finely tuned engineering and high quality control that DID is so well known for, using the latest in Japanese chain technology.
The bushing on a chain is important for impact and wear resistance, and help to absorb the shock from the rollers rather than directly transmitting it to the pins. By using rigid, seamless, solid bushes, instead of curled bushes that other manufacturers use, the wear life of a DID Standard chain can be 1.2 to 4 times the life of a chain using curled bushings.
All DID chains are made in Japan.
| Pin Length | Roller Diameter | Plate Thickness | Weight | Tensile Strength |
|---|---|---|---|---|
| 14.75mm | 7.77mm | 1.5mm | 0.7kg/100 links | 18.63KN |
If the original equipment chain was an O-Ring or X-Ring chain it must not be replaced with a non-O-Ring or non-X-Ring chain. It must be replaced with a sealed chain of equal or greater strength.
For more information about transmission chains, take a look at our Chain Maintenance Guide or our Chain Dimensions Guide
All prices are in Pounds Sterling (GBP)and include VAT at 20% where applicable. VAT will be deducted at the checkout for goods supplied to outside the European Union.
Total: £ 0.00
(incl. VAT). Shipping calculated at checkout.