Kawasaki H1-E 74 HEL Front Hydraulic Hose - Standard Set-Up
For Hoses requiring special fittings the banjos can only be supplied in silver.
Made to order usually 24 hours to manufacture
Two lines in a Kit
Supplied with black heat shrink over the end of the hose
HEL: What's stopping you?
Hel Braided Brake Hoses: Front Race Set Up
The race set up has a separate line from the master cylinder to each caliper. Many people find this system easier to bleed than an over-the-mudguard setup, as in an over-the-mudguard setup air bubbles can get caught in the arc of the shorter hose. (See comparison of setups below).
Race hoses are required for race days where over-the-mudguard setups are banned.
Comparison of Brake Line Setups
|Single Line||Double Line
OEM Twin Disc
OEM plus Link Hose
What's in a Hel Race Set Up Brake Line Kit?
- Stainless Steel Brake Lines
- Stainless Steel Banjo Bolts
- Copper Crush Washers
- Fitting Guide
- Personal Lifetime Warranty Number
Stainless Steel Braided Brake Hoses
All HEL hoses are made from braided stainless steel - this prevents distortion of the hose thereby increasing the efficiency of braking compared to a rubber hose. HEL also use stainless steel for all fittings. Both the hose and the fitting can be ordered either plain or in bright, vivid colour.
HEL hoses are proven time and time again both in the lab and on the race track.
Manufactured in the UK, HEL pass all requirements of FMVSS-106; strict testing criteria that all hoses must pass to be legally used on the road. These standards are then used by: DOT and NHSTA (USA), TUV (Germany), ADR (Australia), LTSA (New Zealand), IDR (Israel), and MOT (Europe). Having passed these requirements with flying colours, HEL Performance brake lines can be used anywhere in the world.
Delivery and Returns
We want you to be happy with your purchase. If you're not, just return the products to our warehouse. Unless faulty, we'd like this to be within 30 days of purchase. Exceptions apply to certain products.
Goodridge buildaline stainless steel brake parts have a lifetime guarantee
This is the ideal and best way to improve your brakes. Please Note that all Front Lines come in Racing Format.
For twin disc both brake lines run directly from the master cylinder on to each caliper. A double width Banjo bolt is needed at the Mastercylinder.
Banjo Bolts sold Singularly with 2 copper Washers. Please Remember to buy 2 Caliper Banjos and bolts if needed where you have twin front discs.