Picture of Honda CRF 100 FD 13 Tapered Headrace Bearing Set (By All Balls USA)
  • HONDA CRF 100 FD 13

  • Tapered Headrace Bearing Set (By All Balls USA) [AC7399]

  • $44.81
  • STOCK STATUS: In Stock
  • All prices are in US Dollar (USD) and include VAT at 20% where applicable. VAT will be deducted at the checkout for goods supplied to outside the European Union.

  • Honda CRF 100 FD 13 Full Parts List

Part Description

Honda CRF 100 FD 13 Tapered Headrace Bearing Set (By All Balls USA)

2 Bearings: 22.5x41x12.5mm 24x41x12.5mm
2 Seals

All Balls Logo

All Balls Tapered Headrace Bearings

On models with tapered original steering head bearings All Balls heavy duty tapered bearings function as a high quality direct replacement.

Tapered Bearing

On models that originally took ball-type steering head bearings, All Balls tapered bearings can be used as an upgrade. Ball-type bearings have tiny points of weight-bearing contact area, which means that ball type bearings have a much shorter lifespan than a tapered bearing, where the weight is spread across the long surface of a cylindrical roller. In addition, tapered bearings are far easier to install and do not have the issue of over or under-tightening of the original uncaged bearing design which could cause handling problems.

All Balls tapered steering head/headrace bearing kits contain the upper and lower bearing and seals where appropriate.

Delivery and Returns

We want you to be happy with your purchase. If you're not, just return the products to our warehouse. Unless faulty, we'd like this to be within 30 days of purchase. Exceptions apply to certain products.

Read our full returns policies

Wheel Bearing
Sealed Bearing 2RS - DDU

All the wheel bearing we supply are 2RS - DDU.

Double sealed and ready lubricated with premium grease for added protection against dirt and water ingress and are made of high strength AISI 52100 chrome steel components for the rolling elements and the inner and outer rings; to ABEC 1 dimensional tolerances and C3 radial clearance tolerance.

The bearings also undergo electronic noise and vibration testing according to ANSI/AFBMA Standard 13-1987.

Care And Maintenance

Although bearings are subjected to large amounts of stress and are continually being used to fulfil various duties, they are precision made and typically last a long time (bearing failure is often due to improper installation and fitting). However high-mileage bikes and dirt bikes, which are exposed to a lot of mud and water, can become vulnerable and require attention sooner than expected.

... Read more » Wheel Bearing Information

Instructional DVD- A Guide For Replacing Your Headstock Bearings



The complete guide to checking, removing, replacing and upgrading your headstock bearings. Professionally filmed in our studio, Nick Hine shows you exactly how to do each job - with clear, close-up shots, tips, advice and techniques that enable you to do a professional finish - even if you have no experience.

All DVDs start and end with the bike on the ground, They don't miss out any steps and always use standard home garage tools where possible and show you how to make your own special tools where necessary. We explain why you need to do each task and try to give you a good understanding of the principles behind each job.

  • Accurately check your headstock bearings for wear and play
  • Safely jack up and support your bike
  • Remove the wheel, fairings, forks and of course headstock
  • Remove the old bearings and races from the bike and the headstock
  • Make your own special tools
  • Fit the new bearings and races
  • Grease, install and adjust the headstock
  • Torque up your bolts in the correct order
  • Rebuild your bike
  • ... Read more » DVD Guide - How To Replace Headrace Bearings



Supplying quality after market motorcycle parts direct to the trade