Picture of Honda TRX 400 EX8 08 A-Arm Bearing and Seal Kit Lower
  • HONDA TRX 400 EX8 08

  • A-Arm Bearing and Seal Kit Lower [AD5544]

  • $52.16
  • STOCK STATUS: ETA Please Enquire
  • Non Stock Item Ordered On Request Only

  • QUANTITY
  • All prices are in US Dollar (USD) and include VAT at 20% where applicable. VAT will be deducted at the checkout for goods supplied to outside the European Union.

  • Honda TRX 400 EX8 08 Full Parts List

Part Description

Honda TRX 400 EX8 08 A-Arm Bearing and Seal Kit Lower

Complete A-Arm Bearing and Seal Kit. Includes Bushing, Seal, Spherical Bearing and Snap Ring.

All Balls Logo

All Balls A-Arm Bearing and Seal Kit

All Balls A-Arm bearing and seal kits contain all the parts you need to repair your A-arm in one convenient kit.

The A-Arm kit may contain any of the following as appropriate to the model:

Needle Bearings
Using heat treated 51200 bearing steel.
Spherical Bearings
Precision ground, with low friction teflon liner
Sleeves
52100 bearing steel, hardened and precision ground.
Cap Seals
OEM-style replacement
Seals
TC type double lipped.
Snap Rings

Delivery and Returns

We want you to be happy with your purchase. If you're not, just return the products to our warehouse. Unless faulty, we'd like this to be within 30 days of purchase. Exceptions apply to certain products.

Read our full returns policies

Wheel Bearing
Sealed Bearing 2RS - DDU

All the wheel bearing we supply are 2RS - DDU.

Double sealed and ready lubricated with premium grease for added protection against dirt and water ingress and are made of high strength AISI 52100 chrome steel components for the rolling elements and the inner and outer rings; to ABEC 1 dimensional tolerances and C3 radial clearance tolerance.

The bearings also undergo electronic noise and vibration testing according to ANSI/AFBMA Standard 13-1987.



Care And Maintenance

Although bearings are subjected to large amounts of stress and are continually being used to fulfil various duties, they are precision made and typically last a long time (bearing failure is often due to improper installation and fitting). However high-mileage bikes and dirt bikes, which are exposed to a lot of mud and water, can become vulnerable and require attention sooner than expected.

... Read more » Wheel Bearing Information

Instructional DVD- A Guide For Replacing Your Headstock Bearings

REPLACE YOUR HEADSTOCK BEARINGS

DONT JUST READ ABOUT HOW TO DO IT,
WATCH IT!!

The complete guide to checking, removing, replacing and upgrading your headstock bearings. Professionally filmed in our studio, Nick Hine shows you exactly how to do each job - with clear, close-up shots, tips, advice and techniques that enable you to do a professional finish - even if you have no experience.

All DVDs start and end with the bike on the ground, They don't miss out any steps and always use standard home garage tools where possible and show you how to make your own special tools where necessary. We explain why you need to do each task and try to give you a good understanding of the principles behind each job.

THIS COMPREHENSIVE 36 MINUTE DVD SHOWS YOU HOW TO
  • Accurately check your headstock bearings for wear and play
  • Safely jack up and support your bike
  • Remove the wheel, fairings, forks and of course headstock
  • Remove the old bearings and races from the bike and the headstock
  • Make your own special tools
  • Fit the new bearings and races
  • Grease, install and adjust the headstock
  • Torque up your bolts in the correct order
  • Rebuild your bike
  • ... Read more » DVD Guide - How To Replace Headrace Bearings

WMD

WORLD'S END MOTORCYCLES DISTRIBUTION

Supplying quality after market motorcycle parts direct to the trade