With EU Plug. BC LITHIUM Series is the new generation of BC smart chargers,
specifically for LiFePO4 battery maintenance.
developed to ensure lithium-iron-phosphate batteries give high performance
and a longer life in total safety.
BC LITHIUM 1500 is a battery charger and maintainer with a maximum charging current of 1.5 Amp,
ideal to recover, recharge and maintain the 12V LiFePO4 batteries installed on
motorcycles, scooters and ATVs, from 1 to 100 Ah.
The battery charger is designed to stay permanently connected to the battery,
with no risk and no need to disconnect the battery from the vehicle,
keeping it fully charged during long periods of inactivity (even months).
The 7-steps charging algorithm, developed expressly for lithium batteries,
allows the recovery of deeply discharged batteries, a rapid and efficient charging of the battery,
a charge balancing between the battery cells and proper maintenance of optimum battery state of charge even for long periods.
The battery is analysed at the beginning and the end of the charging process.
Safety is guaranteed during every charging step: in case of low temperatures, detected by an integrated sensor,
POLAR Mode is automatically activated, allowing a safe battery charging in critical ambient temperatures.
A couple of LEDs indicate the charging cycle executed, as well as any functioning error in real time.
A third LED turns on when the POLAR Mode is active.
BC Lithium 1500 does not produce sparks and it is protected against short circuit,
reverse polarity, overcharging and overheating.
The package includes a waterproof battery cable with eyelets (code STD2V),
which can be left permanently installed on the vehicle,
and a battery cable with insulated clamps (code 30AMPPZ).
A universal 12/18 mm adaptor (code ACC612V - optional)
is available to recharge the battery from the cigarette lighter.
The warranty is extended to 3 years.
- 12 Volt and 6 Volt
- Lead acid, AGM, Gel and Lithium batteries
- Quick mode change button on front face
- 2 Amp
- Battery Range 1.3-60Ah
- Cable Length 1m (To quick connect plug), 1.1m (Including clamps/eyelet cable)
- Trickle charger
- Quick release plug with cover
- Wall plug compact design
- Weight 0.58Kg
EU plug adaptor
Model Number: AUTOCHARGE200HF
Ring Terminals For Permanent Connection To Battery.
Waterproof Cap For When Not In Use.
Can Be Used To Charge Battery Using Any Charger Fitted With An SAE Style Connector.
Can Be Used To Power Accessories Compatible With An SAE Style Connector.
Fused Unit Fitter With 7.5 Amp Blade Fuse.
The professional tester suitable for all 6/12V batteries (wet, gel, MF, AGM, VRLA)
from 40 to 2000 CCA (SAE), as well as for 12/24V cranking/charging electrical systems
Easy to use, it provides accurate and reliable results
Fast testing procedure, in few seconds the LCD display shows the test results
as well as a clear recommended action:
A. Good / Pass (battery in good conditions)
B. Good / Recharge
C. Recharge / Retest
D. Bad / Replace
E. Bad Cell / Replace
The device is also suitable to analyse deeply discharged batteries (Voltmeter range: 1.5V to 30V)
In order to minimise the battery drain during the execution of the test,
it's possible to select all the main industry international standards for batteries (SAE, DIN, EN, IEC or JIS)
Patented single load, dynamic resistance technology,
Protective rubber shell, high shock resistance
Practical ABS case for storing and transporting the unit
Non Stock Item Ordered On Request OnlyOptimate O2 Accessory
12V DIN Plug Cable Can-Bus Connector SAE Plug
Fits BMW, Victory and Triumph Models Fitted With Can-bus systems.
Can Also Be Used As A Standard Cigarette Lighter Socket Plug For Charging.
To Use As A Din Socket Plug Simply Twist The Red Cover At The Base Of The Plug Counter Clockwise And Remove.